3/16/2023 0 Comments Mx300 1tb diskmarkHere is a screenshot of the AS SSD copy benchmark results (Crucial MX500 2TB AHCI AMD test setup): Here is a screenshot of the AS SSD benchmark values (Crucial MX500 2TB AHCI AMD test setup):Īnd here is another screenshot of the AS SSD iops results (Crucial MX500 2TB AHCI AMD test setup): Here is a screenshot of the AS SSD benchmark values (Crucial MX500 2TB AHCI Intel test system):Īnd here is another screenshot of the AS SSD iops results (Crucial MX500 2TB AHCI Intel test system): The Crucial MX500 2TB achieves 1167 points, which however is just below the 1206 points of the Samsung SSD 860 Evo and the 1203 points of the Samsung SSD 860 Pro on the Intel test system. The Crucial BX200 480GB SSD was only 731 points on the same test system, but the Crucial MX500 1TB SSD was slightly higher at 888 points.įor a better comparison with the previous Samsung SSD 860 Pro and Samsung SSD 860 Evo SSDs that didn’t run properly with the AMD test system, we also tested the Crucial MX500 2TB again with the Intel test system. The overall score of 871 points is pleasantly high, at least for the somewhat older AMD test system, which we have been using since the beginning of our SATA SSD tests to be able to provide a 100% comparison of the SATA SSDs. With the Crucial Storage Executive Tool you can adjust the over provisioning area as mentioned before and thus determine yourself how high you want to set the SSD durability vs. The usable capacity of the Crucial MX500 is 1863.01 GB. With the 2000GB Crucial drive a high sequential read and write speed could be achieved in the AHCI. For example, the benchmark program simulates a typical program start. By the way, 4K means that small 4K blocks are read or written and with 4K 64Thrd this is distributed to 64 threads at the same time. The AS SSD benchmark values provide a very good indication of the maximum possible read and write speed, the speed for smaller files and their respective access time. The SSD drive speed was examined and compared with the following benchmark software: Microsoft Windows 7 Ultimate Edition and Windows 10 Enterprise Edition 64-bit are currently used as operating systems. The test results for SATA3 drives will be compared with an ASRock 890GX Extreme3 motherboard and the test results for mSATA and M.2 modules will be done with an ASRock Z270 Taichi motherboard. Let us now turn to the benchmark results.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |